Development of a Novel Passive Monitoring Technique to Showcase the 3D Distribution of Tritiated Water (HTO) Vapor in Indoor Air of a Nuclear Facility.

Tritiated water (HTO), a ubiquitous byproduct of the nuclear industry, is a radioactive contaminant of major concern for environmental authorities. Although understanding spatiotemporal heterogeneity of airborne HTO vapor holds great importance for radiological safety as well as diagnosing a reactor's status, comprehensive HTO distribution dynamics inside nuclear facilities has not been studied routinely yet due to a lack of appropriate monitoring techniques. For current systems, it is difficult to simultaneously achieve high representativeness, sensitivity, and spatial resolution. Here, we developed a passive monitoring scheme, including a newly designed passive sampler and a tailored analytical protocol for the first comprehensive 3D distribution characterization of HTO inside a nuclear reactor facility. The technique enables linear sampling in any environment at a one-day resolution and simultaneous preparation of hundreds of samples within 1 day. Validation experiments confirmed the method's good metrological properties and sensitivity to the HTO's spatial dynamics. The air in TU Wien's reactor hall exhibits a range of 3H concentrations from 75-946 mBq m-3 in the entire 3D matrix. The HTO release rate estimated by the mass-balance model (3199 ± 306 Bq h-1) matches the theoretical calculation (2947 ± 254 Bq h-1), suggesting evaporation as the dominant HTO source in the hall. The proposed method provides reliable and quality-controlled 3D monitoring at low cost, which can be adopted not only for HTO and may also inspire monitoring schemes of other indoor pollutants.

CuSO4/[Cu(NH3)4]SO4-Composite Thermochemical Energy Storage Materials.

The thermochemical energy-storage material couple CuSO4/[Cu(NH3)4]SO4 combines full reversibility, application in a medium temperature interval (<350 °C), and fast liberation of stored heat. During reaction with ammonia, a large change in the sulfate solid-state structure occurs, resulting in a 2.6-fold expansion of the bulk material due to NH3 uptake. In order to limit this volume work, as well as enhance the thermal conductivity of the solid material, several composites of anhydrous CuSO4 with inorganic inert support materials were prepared and characterized with regard to their energy storage density, reversibility of the storage reaction, thermal conductivity, and particle morphology. The best thermochemical energy storage properties were obtained for a 10:1 CuSO4-sepiolite composite, combining an attractive energy storage density with slightly improved thermal conductivity and decreased bulk volume work compared to the pure salt.

Bifunctional Fe(II) spin crossover-complexes based on ω-(1H-tetrazol-1-yl) carboxylic acids.

To increase the supramolecular cooperativity in Fe(ii) spin crossover materials based on N1-substituted tetrazoles, a series of ω-(1H-tetrazol-1-yl) carboxylic acids with chain-lengths of C2-C4 were synthesized. Structural characterization confirmed the formation of a strong hydrogen-bond network, responsible for enhanced cooperativity in the materials and thus largely complete spin-state transitions for the ligands with chain lenghts of C2 and C4. To complement the structural and magnetic investigation, electronic spectroscopy was used to investigate the spin-state transition. An initial attempt to utilize the bifunctional coordination ability of the ω-(1H-tetrazol-1-yl) carboxylic acids for preparation of mixed-metallic 3d-4f coordination polymers resulted in a novel one-dimensional gadolinium-oxo chain system with the ω-(1H-tetrazol-1-yl) carboxylic acid acting as µ2-η2:η1 chelating-bridging ligand.

Interstellar

Earth is constantly bombarded with extraterrestrial dust containing invaluable information about extraterrestrial processes, such as structure formation by stellar explosions or nucleosynthesis, which could be traced back by long-lived radionuclides. Here, we report the very first detection of a recent ^{60}Fe influx onto Earth by analyzing 500 kg of snow from Antarctica by accelerator mass spectrometry. By the measurement of the cosmogenically produced radionuclide ^{53}Mn, an atomic ratio of ^{60}Fe/^{53}Mn=0.017 was found, significantly above cosmogenic production. After elimination of possible terrestrial sources, such as global fallout, the excess of ^{60}Fe could only be attributed to interstellar ^{60}Fe which might originate from the solar neighborhood.

Cycle Stability and Hydration Behavior of Magnesium Oxide and Its Dependence on the Precursor-Related Particle Morphology.

Thermochemical energy storage is considered as an auspicious method for the recycling of medium-temperature waste heat. The reaction couple Mg(OH)2⁻MgO is intensely investigated for this purpose, suffering so far from limited cycle stability. To overcome this issue, Mg(OH)2, MgCO3, and MgC2O4·2H2O were compared as precursor materials for MgO production. Depending on the precursor, the particle morphology of the resulting MgO changes, resulting in different hydration behavior and cycle stability. Agglomeration of the material during cyclization was identified as main reason for the decreased reactivity. Immersion of the spent material in liquid H2O decomposes the agglomerates restoring the initial reactivity of the material, thus serving as a regeneration step.

Adsorption characteristics of a clinoptilolite-rich zeolite compound for Sr and Cs.

The Sr and Cs adsorption capacities of LithoFill™, LithoGran™ and a competing clinoptilolite containing zeolite product were investigated by radioanalytical methods (85Sr and 134Cs gamma spectroscopy). The dependence of adsorption and adsorption rate on physical factors including temperature, available ions and time were assessed. In addition, the reversibility of adsorption under high ionic strength conditions was also examined. In general, cesium is more strongly adsorbed than strontium, adsorption yields are generally independent of temperature (from room temperature to 65 °C) and adsorption is relatively rapid (identical results for 2 or 5 day adsorption times). As expected, increasing the concentration of other ions in solution tends to reduce adsorption of cesium and strontium. In general, Cs adsorption ranges between 54.5 and 45.2 mg/g for LitoFill and LitoGran samples and between 36.9 and 24.4 mg/g for the competing product. For Sr adsorption, ranges are 30-21 mg/g and 7.3-6.7 mg/g respectively, leading to the conclusion that the higher content of clinoptilolite in the LitoFill/LitoGran samples results in better adsorption characteristics.

Cooperativity in spin crossover materials as ligand's responsibility - investigations of the Fe(ii) - 1,3-bis((1H-tetrazol-1-yl)methyl)bicyclo[1.1.1]pentane system.

Criteria for a technologically relevant spin crossover (SCO) material include temperature and abruptness. A series of Fe(ii) - 1,3-bis((1H-tetrazol-1-yl)methyl)bicyclo[1.1.1]pentane SCO complexes with various anions (BF4-, ClO4-, and PF6-) designed using a structure-property based concept is reported. All complexes feature abrupt SCO-behavior with T1/2 between 170 K and 187 K. These materials demonstrate that without stabilizing the effects of incorporated solvents or a hydrogen bond-network, the observed cooperativity during high-spin-low-spin transition is anion independent and originates only from the rigidity and internal strain of the propellane-moiety in the ligand. Spectroscopy and structural investigations of these materials are supported by quantum chemical calculations.

Halogenated Alkyltetrazoles for the Rational Design of FeII Spin-Crossover Materials: Fine-Tuning of the Ligand Size.

1-(3-Halopropyl)-1H-tetrazoles and their corresponding FeII spin-crossover complexes have been investigated in a combined experimental and theoretical study. Halogen substitution was found to positively influence the spin transition, shifting the transition temperature about 70 K towards room temperature. Halogens located at the ω position were found to be too far away from the coordinating tetrazole moiety to have an electronic impact on the spin transition. The subtle variation of the steric demand of the ligand in a highly comparable series was found to have a comparatively large impact on the spin-transition behavior, which highlights the sensitivity of the effect to subtle structural changes.

Picomolar Traces of Americium(III) Introduce Drastic Changes in the Structural Chemistry of Terbium(III): A Break in the "Gadolinium Break".

The crystallization of terbium 5,5'-azobis[1H-tetrazol-1-ide] (ZT) in the presence of trace amounts (ca. 50 Bq, ca. 1.6 pmol) of americium results in 1) the accumulation of the americium tracer in the crystalline solid and 2) a material that adopts a different crystal structure to that formed in the absence of americium. Americium-doped [Tb(Am)(H2 O)7 ZT]2 ZT⋅10 H2 O is isostructural to light lanthanide (Ce-Gd) 5,5'-azobis[1H-tetrazol-1-ide] compounds, rather than to the heavy lanthanide (Tb-Lu) 5,5'-azobis[1H-tetrazol-1-ide] (e.g., [Tb(H2 O)8 ]2 ZT3 ⋅6 H2 O) derivatives. Traces of Am seem to force the Tb compound into a structure normally preferred by the lighter lanthanides, despite a 108 -fold Tb excess. The americium-doped material was studied by single-crystal X-ray diffraction, vibrational spectroscopy, radiochemical neutron activation analysis, and scanning electron microcopy. In addition, the inclusion properties of terbium 5,5'-azobis[1H-tetrazol-1-ide] towards americium were quantified, and a model for the crystallization process is proposed.

Reactivity of a hypervalent iodine trifluoromethylating reagent toward THF: ring opening and formation of trifluoromethyl ethers.

1-Trifluoromethyl-1,2-benziodoxol-3-(1H)-one (1) is able to transfer the electrophilic CF(3) group to the oxygen atom of THF in the presence of a Lewis or Bronsted acid. This results in a new ring-opening reaction of THF yielding trifluoromethyl ethers. Details of this reaction and the insight gained into the mechanism of action of reagent 1 are reported.

Does [I3]+ act as an "[I]+" donor to CH3CN and N2O? Structure of [H3CCN-I-NCCH3]+ [AsF6]-.

The solid state structure of the [(CH(3)CN)(2)I](+) cation in [(CH(3)CN)(2)I][AsF(6)] was determined using single crystal X-ray diffraction. The highly reactive cation was prepared by reaction of [I(3)][AsF(6)] with CH(3)CN in liquid SO(2). In the solid state, the CNI backbone consisting of seven atoms is linear and shows a dicoordinate iodine center. The ability of [I(3)][AsF(6)] to act as a source of "[I](+)" to CH(3)CN and N(2)O is compared, and the computed structures of the [CH(3)CNI](+), [(CH(3)CN)(2)I](+), [IN(2)O](+) and [ION(2)](+) cations are discussed.

Acid-mediated formation of trifluoromethyl sulfonates from sulfonic acids and a hypervalent iodine trifluoromethylating agent.

A variety of sulfonic acids have been trifluoromethylated using 1-trifluoromethyl-1,2-benziodoxol-3(1H)-one under mild conditions in good to excellent yields. Initial mechanistic investigations of this reaction show a clean second-order kinetics and only very weak substrate electronic effects.

Alkali metal 5-nitrotetrazolate salts: prospective replacements for service lead(II) azide in explosive initiators.

A family of sensitive energetic salts of the 5-nitrotetrazolate anion with alkali metal cations (Li+, Na+, K+, Rb+ and Cs+) were synthesized either by the digestion of an acid copper salt of 5-nitrotetrazole with a suitable metal hydroxide, or alternatively by reaction of ammonium 5-nitrotetrazolate with a suitable metal base (MOH, MHCO3 or M2CO3) in aqueous or alcoholic solution. All the compounds were characterized by analytical methods (elemental analysis and mass spectrometry) and spectroscopic methods (NMR and vibrational spectroscopy). The lighter metal salts and , incorporate three and two crystal water molecules in the structure, respectively, whereas the heavier alkali metal derivatives form anhydrous species, and thus showed enhanced sensitivity to friction and shock. In addition, the crystal structure of each of the new materials was determined by X-ray diffraction techniques ( and : monoclinic, P2(1)/c; : triclinic, P1; : monoclinic, Cc and : monoclinic, C2/c). The thermal stability of compounds was assessed by differential scanning calorimetry (DSC) measurements showing significant thermal stability. Lastly, the energies of combustion of and were measured experimentally using oxygen bomb calorimetry (, -1340(15) cal g(-1) and , -1200(20) cal g(-1)) and was used to calculate their standard molar heats of formation (, -610(55) kJ mol(-1) and , -360(65) kJ mol(-1)).

Simple, nitrogen-rich, energetic salts of 5-nitrotetrazole.

A new family (ammonium, 1, hydrazinium, 2, guanidinium, 3, aminoguanidinium, 4, diamino-guanidinium, 5, and triaminoguanidinium, 6) of simple, nitrogen-rich energetic salts based on 5-nitro-2 H-tetrazole (HNT) were synthesized. In addition, the hemihydrate of 1 (1a) and the hydrate of 6 (6a) were also isolated. In all cases, stable salts were obtained and fully characterized by vibrational (IR, Raman) spectroscopy, multinuclear ((1)H, (13)C and (14)N) NMR spectroscopy, mass spectrometry, elemental analysis, and X-ray structure determination. Compounds 1and 2 crystallize in the monoclinic space group P2 1/c, 1a and 3 crystallize in C/2 c, 4 in P2 1/n, 5 in P2 1, 6 in orthorhombic P2 12 12 1, and 6a in triclinic P1. Initial safety testing (impact, friction, and electrostatic sensitivity) and thermal stability measurements (DSC) were also carried out. The NT salts all exhibit good thermal stabilities (decomposition above 150 degrees C). The constant volume energies of combustion (Delta c U(exp)) of 1-6 were experimentally determined by oxygen bomb calorimetry to be -1860(30) cal/g ( 1), -1770(30) cal/g ( 1a), -2110(150) cal/g (2), -2250(40) cal/g ( 3), -2470(30) cal/g (4), -2630(40) cal/g (5), -2690(50) cal/g (6), and -2520(50) cal/g (6a). Because of the significant experimental uncertainties obtained in these measurements, their validity was checked by way of quantum chemical calculation (MP2) of electronic energies and an approximation of lattice enthalpy. The predicted constant volume energies of combustion (Delta c U(pred)) calculated by this method were -2095.9 cal/g (1), -1975.7 cal/g ( 1a), -2362.4 cal/g (2), -2526.6 cal/g (3), -2654.6 cal/g (4), -2778.6 cal/g ( 5), -2924.0 cal/g (6), and -2741.4 cal/g ( 6a). From the experimentally determined density, chemical composition, and energies of formation (back calculated from the heats of combustion) the detonation pressures and velocities of 1 (7950 m/s, 23.9 GPa), 1a (7740 m/s, 22.5 GPa), 2(8750 m/s, 30.1 GPa), 3 (7500 m/s, 20.1 GPa) 4(8190 m/s, 24.7 GPa), 5(8230 m/s, 24.4 GPa), 6 (8480 m/s, 26.0 GPa) and 6a (7680 m/s, 20.7 GPa) were predicted using the EXPLO5 code.

Salts of methylated 5-aminotetrazoles with energetic anions.

1-methyl-5-aminotetrazole (4, MAT) can easily be protonated by strong acids, yielding known but largely uninvestigated 1-methyl-5-aminotetrazolium nitrate (4a) and perchlorate (4b). Methylation, rather than protonation, of 4 with iodomethane followed by the exchange of the iodide (5a) for nitrate (5b), perchlorate (5c), azide (5d), and dinitramide (5e) yields a new family of energetic methylated aminotetrazole salts. In all cases, stable salts were obtained and fully characterized by vibrational (IR, Raman) spectroscopy, multinuclear NMR spectroscopy, mass spectrometry, elemental analysis, and X-ray structure determination. Compounds 4a, 4b, and 5c crystallize in the monoclinic space group P2(1)/n, whereas compounds 5b and 5e crystallize in the orthorhombic space group P2(1)2(1)2(1) and 5d in the orthorhombic Fddd. Initial safety testing (impact, friction, and electrostatic sensitivity) and thermal stability measurements (DSC) were also carried out. The MAT salts all exhibit good thermal stabilities (decomposition above 150 degrees C). The constant volume energies of combustion (DeltacU) of 4a, 5b, 5d, and 5e were determined to be -2510(10) cal/g, -3190(30) cal/g, -4500(100) cal/g, and -2570(70) cal/g, respectively, experimentally using oxygen bomb calorimetry. From the experimentally determined density, chemical composition and energies of formation (back calculated from the heats of combustion), the detonation pressures and velocities of 4a (8100 m/s, 25.6 GPa), 5b (7500 m/s, 20.2 GPa), 5d (8200 m/s, 21.7 GPa), and 5e (7500 m/s, 21.2 GPa) were predicted using the EXPLO5 code.